Positron Emission Tomography of Not-Full-Ring Sensors arrangement: Simulation and Verification for internal imaging of hydraulic cylinder

The research goal of this article is to imaging the oil distribution in landing gear hydraulic cylinder by Positron Emission Tomography(PET). Considering the flexibility and commercial cost for automation testing, two kinds of Not-Full-Ring sensors arrangement, Uniform-arrangement and Bilateral-arrangement, are proposed. The Full-Ring PET is used as the contrast template of imaging. Firstly, GATE 7.1 is used as the Monte Carlo simulation platform to simulate the sensors arrangement of the two Not-Full-Ring schemes. The results of scattering fraction, sensitivity and photon energy distribution were used to evaluate the feasibility of the two schemes. Then, a set of verification device with rotating platform and variable sensing diameter is constructed. The two kinds of Not-Full-Ring sensors arrangements were verified through the verification device. By imaging the hydraulic oil in the hydraulic cylinder, the results were evaluated and compared by using Signal Noise Ratio(SNR). According to the simulation and verification results, Not-Full-Ring scheme is feasible for imaging the liquid distribution in the hydraulic cavity. Uniform- arrangement has a more better imaging performance than Bilateral-arrangement. Such sensors arrangement scheme is not only suitable for this research, but also suitable for other PET imaging applications which need to consider the flexibility and commercial cost.