Design and fabrication of a 4-bit RF MEMS attenuator with a high attenuation accuracy

This paper presents a 4-bit micro-electromechanical system (MEMS) digital attenuator with improved attenuation accuracy by surface micromachining. The attenuator is consisted of monoblack type radio frequency MEMS switches and TaN film resistors fabricated on a glass substrate to control the reconfigurable power within DC ~ 18 GHz. The simulation results revealed that the device had favorable terminal matches ranging from 0 to 70 dB with a 10 dB step. The attenuation accuracy was better than 1.2 dB, the insertion loss was less than 1.32 dB, and the voltage standing wave rations were better than 1.56 under these eight attenuation steps. Additionally, the package size of this device was designed as 8.28 mm × 2.37 mm × 0.85 mm, such that it could be applied to miniaturized microwave instruments.