Interface reactions between rutile coatings and molten aluminium or AlSi7Mg0.6 alloy

Abstract Rutile coatings deposited on corundum substrates are considered as promising functional elements improving the efficiency of the filtration of oxide inclusions out of aluminium melts. This contribution describes the reactions between rutile and two kinds of the aluminium melts and discusses the consequences of these reactions for the filtration process. It was found that the contact of rutile coatings with molten aluminium leads to the formation of a corundum layer at the solid/liquid interface. The exposure of the rutile coatings to molten AlSi7Mg0.6 alloy produces an interface layer of MgTiO 3 . The interface layers possess defined orientation relationship to rutile which is characteristic for locally heteroepitaxial growth. The density functional theory calculations revealed that the TiO 2 /α-Al 2 O 3 and TiO 2 /MgTiO 3 interfaces with the orientation relationships observed experimentally have low interface energies. The mechanisms of the interface layer formation and the impact of these layers on the degradation of the rutile coatings are discussed.