Schneller geht's im Team: Effiziente Fertigung von Flügelschalen
2017
Beside the further development of existing
production technologies of large carbon fibre
reinforced (CFR) structures, completely new
man-ufacturing strategies have to be modeled
and tested to counteract the striven
production rate of 60AC/month. Within the
LuFo V-1 funded project “Efficient Wing Cover
Manufacturing” (EWiMa), therefore the
fibre layup of a wing cover with two manufacturing
units working simultaneously will
be tested and demonstrated for the first time
using the GroFi® plant of the ZLP in Stade.
Due to a simulated process, a time saving of
38% is expected.
In addition the use of a segmentally heatable
curing tool is investigated. By the use of
a thermal camera system, mounted in the
research autoclave of the ZLP in Stade, the
triggering of the heatable tool is completely
done by the autoclave control system. Beside
an improvement of the manufacturing
quality, a time saving of the energy-intensive
autoclave process and thus a reduction of
the manufacturing cost is expected with this
approach.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI