Stability assessment of density reference liquids supported by GC-MS analysis (density reference liquids stability supported by GC-MS)
2010
Abstract Density measurements are frequently associated to specific requirements to evaluate the quality of a process or to determine mass and/or volume of the material. Certified reference liquids can be used to assure metrological traceability of density measurements to the SI with uncertainty lower than 0.005%. This paper presents the new approach of INRIM to set density standards. The procedure involved accurate density determinations of some reference liquids which were supported by gas-chromatography coupled with mass spectrometry (GC–MS) in order to assess their homogeneity and short-term stability. GC–MS analyses on tetrachloroethylene and trichloroethylene were carried out before and after density measurements. Samples that had undergone to variations in density value showed also different gas-chromatographic profiles. In the same time, samples that had not undergone to density variations kept similar gas-chromatographic profiles. The results support the approach of combining independent methods in order to set physico-chemical properties of reference materials.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
3
References
0
Citations
NaN
KQI