Isotope correlation technique for Pu mass analysis of PWR UO2 spent fuel rods

ABSTRACTA simple and fast method of nuclear material accountancy of pressurized water reactor (PWR) UO2 spent fuel rods for safeguards application was developed utilizing the isotope correlation between the amounts of 137Cs and total Pu. To this end, the following steps were taken: (1) as much destructive analysis (DA) data as possible for segments taken from a PWR UO2 spent fuel rod were aggregated from publicly available data sources; (2) the DA data were corrected so as to have the same cooling time (i.e., CT = 0 y) and analyzed for outliers; (3) an equation converting the 137Cs amount to the Pu amount was obtained by regression analysis with logarithmic curve fitting; and (4) the error in determining the Pu amount was evaluated for the imposition of a limit on the range of burnup (BU) or initial enrichment (IE). It was found that the averaged % error in calibration was determined to be 3.88% ± 2.68% (= mean ± 1 standard deviation) for the BU range over 30 GWd/tU and falling with increasing BU range. O...