CuO Nanowire-Based Humidity Sensor
2012
The authors report the growth of CuO nanowires on an oxidized Cu wire and the fabrication of a CuO nanowire humidity sensor. It was found that we could transform a Cu wire into CuO/Cu 2 O/Cu core-shell tri-layers covered with high density CuO nanowires by thermal annealing. It was also found that steady state currents of the sensor were about 2.44, 2.32, 2.23, and 2.15 μA , respectively, when measured with 20, 40, 60, and 80% relative humidity. Furthermore, it was found that sensing property of the fabricated device was stable and reproducible.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
33
References
37
Citations
NaN
KQI