Unsteady Work and Wake Recovery due to Pressure Wave Interaction in a LP Turbine

Recent publications have demonstrated the influence of unsteady work terms on the inviscid recovery of wake momentum. So far, this so-called wake differential work effect was only validated based on selected locations and time steps in turbine rotors. The magnitude of this effect over a whole blade passing cycle and the local unsteady work mechanisms causing it are still not fully understood. Using a numerical simulation, the unsteady static pressure field of a turbine rotor is assessed. Three regions are identified in which work is transfered unsteadily to the fluid, caused by the fluid interaction with the unsteady rotor pressure field. A Lagrangian analysis is performed to validate and quantify the wake differential work concept. To be representative, a large number of wake and free stream fluid particle paths are evaluated. Overall, a 7 per cent lower wake work in the rotor is identified, averaged over a whole blade passing cycle. From a particle point of view, the rotor pressure field acts as a pressure wave propagating in circumferential direction. Due to inviscid unsteady work, this pressure wave influences the stagnation enthalpy of the fluid particles. It is shown that this effect is more dominant for wake fluid, as the wake velocity is closer to the propagation velocity of the pressure wave. A mathematical model of this so-called “wake surfing effect” and the two other unteady work mechanisms reveals how the wake momentum is recovered depending on the initial wake velocity vector. If exploited well, this unsteady work mechanism could cause a reduction of wake mixing loss, leading to an increased turbine efficiency.Copyright © 2015 by ASME