Current distribution measurement in YBCO thin film for a superconducting fault current limiter

Abstract Current distribution in the superconducting film for a resistive fault current limiter is important, because it influences AC loss and a uniformity of S/N transition. The lateral current distribution of the film was reconstructed from the magnetic field distribution which is measured by multiple Hall probes. The following results were obtained. (1) Non-uniform current distribution in the superconducting film was observed when the current was less than 1.3 times of critical current ( I c ). (2) The current in a superconducting film was uniform when the current was much higher than I c . The current can be considered uniform when the film works as a fault current limiter, because the S/N transition starts about twice of I c . (3) The validity of the measurement was verified by the comparison with the electric circuit simulation.