Encapsulation of isoflavone with milk, maltodextrin and gum acacia improves its stability

Abstract This study was carried out for extraction of soy isoflavones and entrapment of the isoflavones so obtained into whole milk via encapsulation techniques. Three different solvent (ethanol, methanol and acetonitrile) were used for the extraction of isoflavone using three stage of extraction. The extracted isoflavone was encapsulated into 200 ml of whole milk by spray drying using different concentrations of gum acacia (4, 6 and 8% w/v) and 10% w/v maltodextrin DE 18. The ratio between cores to coating materials was 1:10. Though acetonitrile extracted higher amount of isoflavone, ethanol was selected for subsequent studies of extraction of isoflavone, as per the legislations regarding use of Food-grade solvents. There was no significant difference (p>0.5) among all three samples 4% gum acacia+10% maltodextrin (A), 6% gum acacia+10% maltodextrin (B) and 8% gum acacia+10% maltodextrin (C) in terms of moisture content and hygroscopicity. However, insolubility index showed that sample A possessed a higher solubility index. Encapsulation techniques suggested that sample A showed higher encapsulation efficiency than others. Statistical analysis suggested that there was no significant difference among samples A, B and C during storage at 4 oC for the time period (30 days) studied, in terms of isoflavone retention rate. However, samples stored at 25 and 37oC showed significant difference in the retention rate. Among all the three samples, sample B showed significantly lower isoflavone degradation rate of 3.80, 4.07 and 4.70 ×10-3/day at 4, 25 and 37oC, respectively. The highest amount of isoflavone degradation was observed at 37oC. Results indicate that isoflavone can be encapsulated using a combination of gum acacia either 4 or 6% w/v and 10% maltodextrin along with milk proteins at 4oC for longer shelf life.