A novel hybrid material based on polytrimethylsilylpropyne and hypercrosslinked polystyrene for membrane gas separation and thermopervaporation

To improve the membrane permeability and separation properties in gas separation processes and thermopervaporative (TPV) recovery of butanol from model fermentation mixtures, hybrid membranes based on polymers with an extremely high free fractional volume—polytrimethylsilylpropyne (PTMSP) and hypercrosslinked polystyrene (HCL-PS)—have been first prepared and experimentally studied. The composite membranes have been fabricated using the commercial sorbent Purolite Macronet MN-200 exhibiting high sorption capacity for organic solvents. It has been found that in the hybrid membranes, HCL-PS sorbent particles are nonuniformly distributed throughout the volume: they are located in the surface layer of the membrane. It has been shown that the introduction of a small amount of a modifying component (0.5–1.0 wt %) into the PTMSP matrix improves the time stability of transport properties and increase by a factor of 1.5–2 the permeability coefficients of the material to light gases (N2, O2, CO2, CH4) and butane vapor. It has been found that hybrid PTMSP/HCL-PS membranes have higher separation factors than those of PTMSP membranes in the TPV separation of a butanol/water binary mixture.