Catalytic activity of electrodeposited cobalt oxide films for methane combustion in a micro-channel reactor

Abstract This paper studies the catalytic combustion of a methane-air mixture inside a micro-channel reactor coated with cobalt oxide (Co 3 O 4 ) film. The Co 3 O 4 was coated on the reactor channels by an inexpensive electrodeposition method. A cohesive film with large accessible surface area was fabricated with the method described, which allowed the control of the film thickness. Complete combustion of methane was achieved at 760 °C. The catalytic activity profiles obtained suggest that the reaction is carried only via catalytic combustion up to 600 °C, while both gas-phase and catalytic combustion might occur simultaneously at higher temperatures. The measured catalytic reaction rate per unit area was aligned with the reaction rate reported for similar reactors and operating conditions. Results showed that the catalytic films did not deactivate after a total of 50 h of cyclic operation. Tests with different reactants concentration revealed a first order dependence of the reaction rates for methane concentration and a near zero-order dependence on the oxygen concentration, at 600 °C. The measured data was successfully fitted by a chemistry model proposed in the literature. Overall, this work highlights the potential of using inexpensive electrodeposited films of Co 3 O 4 on micro-channel reactors for combustion of hydrocarbons.