Characterization of high thermal conductivity fuel surrogates before and after ion irradiation
2021
Abstract High thermal conductivity nuclear fuels offer important potential advantages over traditional oxide-based fuels such as higher burnup, reduction in fission gas release, and better overall safety of the system. One proposed approach to high thermal conductivity fuels utilizes high thermal conductivity nonfissile additives with UO2 fuel to lower the fuel operating temperature and thereby take advantage of the highly favorable radiation resistance of UO2 at lower operating temperatures. However, differential swelling in the matrix and high conductivity additive phases during high dose irradiation could lead to internal cracking and poor performance. In the current study, ceria (CeO2) and zirconia (ZrO2) surrogate matrices were used to model UO2 behavior. Additives of 10 vol. % Al2O3 or SiC in the form of short fibers or platelets were used for the high conductivity second phase. The nuclear fuel surrogates were sintered to achieve densities greater than 93% of the ideal values. Scanning electron microscopy (SEM) imaging and X-ray diffraction confirmed the uniform distribution of the second phase and that no intermetallic second phase was formed during sintering. The thermal conductivity of the sintered samples was measured from 50 °C to 900 °C and confirmed the desirable increase compared to pure CeO2/ZrO2 pellets. Samples were irradiated with 20 MeV Ni6+ ions at midrange doses ranging from 1 to 15 displacements per atom (dpa) and temperatures from 300 °C to 700 °C. Post irradiation characterization revealed a good stability of the samples at low to medium doses with matrix lattice parameter swelling of
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
80
References
0
Citations
NaN
KQI