OATCR: Outdoor Autonomous Trash-Collecting Robot Design Using YOLOv4-Tiny
2021
This paper proposed an innovative mechanical design using the Rocker-bogie mechanism for resilient Trash-Collecting Robots. Mask-RCNN, YOLOV4, and YOLOv4-tiny were experimented on and analyzed for trash detection. The Trash-Collecting Robot was developed to be completely autonomous as it was able to detect trash, move towards it, and pick it up while avoiding any obstacles along the way. Sensors including a camera, ultrasonic sensor, and GPS module played an imperative role in automation. The brain of the Robot, namely, Raspberry Pi and Arduino, processed the data from the sensors and performed path-planning and consequent motion of the robot through actuation of motors. Three models for object detection were tested for potential use in the robot: Mask-RCNN, YOLOv4, and YOLOv4-tiny. Mask-RCNN achieved an average precision (mAP) of over 83% and detection time (DT) of 3973.29 ms, YOLOv4 achieved 97.1% (mAP) and 32.76 DT, and YOLOv4-tiny achieved 95.2% and 5.21 ms DT. The YOLOv4-tiny was selected as it offered a very similar mAP to YOLOv4, but with a much lower DT. The design was simulated on different terrains and behaved as expected.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
24
References
0
Citations
NaN
KQI