Demonstration of Constant 8 W/mm Power Density at 10, 30, and 94 GHz in State-of-the-Art Millimeter-Wave N-Polar GaN MISHEMTs

2018 
This paper reports on state-of-the-art millimeter-wave power performance of N-polar GaN-based metal–insulator–semiconductor high-electron-mobility transistors at 30 and 94 GHz. The performance is enabled by our N-polar deep recess structure, whereby a GaN cap layer is added in the access regions of the transistor to simultaneously enhance the access region conductivity while mitigating dc-to-RF dispersion. The impact of lateral scaling of the drain access region length is examined using the tradeoff between breakdown voltage and small-signal gain. Load-pull measurements are presented at 94 GHz, corresponding to the target device operating frequency in W-band, where the device demonstrated a peak power-added efficiency (PAE) of 28.8% at 16 V and record-high maximum output power density of 8 W/mm at 20 V. Additional load-pull measurements at 30 and 10 GHz demonstrate the viability of this device across a wide frequency range where the peak power remained constant at 8 W/mm and with peak PAEs of 56% and 58%, respectively.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    35
    References
    82
    Citations
    NaN
    KQI
    []