Zaria Universal Oxygenator Holder Phase I
2014
Introduction: The conduct of cardiopulmonary bypass surgery requires the use of equipment and devices like the oxygenator. The oxygenator comes in different makes and each manufacturer customizes the carrier or ‘holder’ of this device specific to their design. Aim: This paper presents an innovation designed to overcome the need to purchase a different holder for every oxygenator thereby cutting the cost. Materials and Methods : A sheet of iron measuring 1.9 cm (width) × 0.1 cm (thickness) was used to design the holder circular main frame. Another sheet measuring 2 cm (width) × 0.6 cm (thickness) × 24 cm (length) was used to construct a V‑shaped handle with the arms of the V attached to the main frame 7 cm apart. At the narrow base of the handle is a latch requiring two 13‑gauge screws to attach the holder to the heart‑lung machine. Within the circumference of the main frame are four T‑shaped side arms which grip the oxygenator; located at 2, 5, 7 and 11 O’clock positions. The stem of the T consist of a 0.6 cm (thickness) × 13 cm (length) rod drilled through the main frame. The cross of the T consists of variable lengths of the same sheet as the mainframe attached to the stem by a screw mechanism. At the base of the T, is attached a circular handle (4 cm in diameter) made of 0.4 cm iron rod. Result: An oxygenator holder which weighs 1.75 kg with a total length of 54 cm (the diameter of the mainframe is 30 cm). Its advantages include (i) affordability, (ii) materials are locally accessible, (iii) versatility (iv) reproducibility. The disadvantages include, (i) it requires some time to fit, (ii) caution is required in fitting the oxygenator to avoid breakage, (iii) a spanner is required to lock the latch. Conclusion: The concept of a universal holder is pertinent, especially in resource poor environments to avoid purchasing a new holder whenever the usual oxygenator common to the centre is unavailable. This device is amenable to further modifications to meet the unforeseen challenges. Keywords: Holder, innovation, oxygenator, universal
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
2
References
3
Citations
NaN
KQI