The influence of demineralisation and ammoxidation on the adsorption properties of an activated carbon prepared from a Polish lignite

The preparation of cheap nitrogen-enriched materials with large adsorptive capacities and selectivity towards volatile organic compounds remains a challenge. Ammoxidation has been used to prepare nitrogen-enriched activated carbons using a demineralised Polish lignite. The lignite samples were demineralised by two different methods before nitrogen-enrichment by ammoxidation and physical activation in steam. The surface chemistry was investigated by elemental analysis, Boehm titration, infrared and XPS spectroscopies and adsorptive properties by a linear solvation energy relationship approach. Results show a quasi-total demineralisation and a higher reactivity towards nitrogen for the demineralised samples. The BET surface is also higher than for the non-demineralised lignite. Active carbons previously ammoxidated and demineralised are more interesting in terms of selective removal of gaseous pollutants.