Raw materials influence the alpha-particle emission rate of AlN
1996
Most electronic devices are packaged in plastic, generally epoxy-based molding compounds. Organic compounds serve as effective barriers for alpha particles. However, sensitive or thermally stressed devices often must be packaged in ceramic packages, including Al{sub 2}O{sub 3}, glass ceramics, BeO and AlN. Therefore, the concentration of alpha-particle-generating elements and the tendency of the material to induce soft errors in the device must be considered when selecting a ceramic package option. AlN is a relatively new packaging material. It offers high thermal conductivity ({ge}170 W/(m{center_dot}K)), dielectric and mechanical properties comparable to Al{sub 2}O{sub 3} and a coefficient of thermal expansion similar to silicon. AlN substrates and packages are produced via pressureless sintering or hot pressing, using high-purity powders and sintering aids, generally alkaline- and/or rare-earth oxides. The concentration of alpha-particle-emitting elements in AlN ceramics depends on the concentration of these elements in the AlN and additive powders. In the present work, the concentration of alpha-particle-generating elements uranium and thorium in AlN powders is shown to be related to the levels of these elements in the raw materials used in AlN powder synthesis.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
3
Citations
NaN
KQI