Effect of Axial Loading on Quench Performance in Nb3Sn Magnets

A series of tests has been performed at Lawrence Berkeley National Laboratory (LBNL) and Fermi National Accelerator Laboratory (FNAL) with the goal of assessing the influence of coil axial pre-load on Nb{sub 3}Sn magnet training. The tests involved two subscale Nb{sub 3}Sn magnets: SQ02, a quadrupole magnet fabricated as part of the US LHC Accelerator Research Program (LARP), and SD01, a dipole magnet developed in collaboration between CEA/Saclay and LBNL. Both magnets used similar Nb{sub 3}Sn flat racetrack coils from LBNL Subscale Magnet Program, and implemented an axial support system composed of stainless steel end-plates and aluminum rods. The system was designed to withstand full longitudinal electro-magnetic forces and provide controllable preloads. Quench performances, training, and quench locations have been recorded in various axial loading conditions. Test results are reported.