EPS System Analysis using Multi Domain Simulation for Power Network Design in a Vehicle

2007 
An EPS system requires large electrical power depending on steering torque. Recently, the required steering torque is getting larger especially for luxury sedans and large Sports Utility Vehicles. In heavy vehicles, the steering without driving and the emergency steering are becoming a very heavy load for a conventional 12 V battery system. Therefore, it is important to estimate the battery power management and the voltage behavior using the multi domain simulation for concept planning. The purpose of this research is to show that multi domain simulation is effective to discuss power electronics system and power network in the vehicle. This paper describes modeling method for an EPS system using VHDL-AMS. Static steering and dynamic steering results were validated in comparison with experimental data.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    3
    References
    7
    Citations
    NaN
    KQI
    []