RF network analysis of the WEST TWA mock-up in TITAN

Abstract WEST represents the ideal device to test a reactor relevant travelling wave array (TWA) due to its long pulse capability and full metal wall configuration. Moreover, the already installed ICRF high power launchers will allow a direct comparison between a classical in-port antenna and the TWA. The design and exploitation of a high power (2 MW) TWA mock-up to be tested in TITAN represent the first step towards its integration in WEST. This paper presents the progress in the RF characterization of this high power mock-up. An integrated modelling scheme based on the full-wave code HFSS and on Python packages for RF circuit simulations is developed and used to parametrically analyse the response of the mock-up inside TITAN. The sensitivity of the antenna to geometrical deformations, e.g. thermal dilatation or manufacturing tolerances, is analysed. The use of trimmers to compensate those deformations is discussed and results from a manufactured trimmer test-bed are presented. A diagnostic system is proposed to measure electric field and current on the straps. Aspects like sensitivity and calibration are briefly discussed. In conclusion, the next steps of the project are outlined.