Polyethylene cellulose nanofibrils nanocomposites

Abstract This paper investigates the use of an aqueous dispersion of polyethylene copolymer with a relatively high content of acrylic acid as a compatibilizer and as an alternative medium to obtain polyethylene CNF nanocomposites. The CNF content was varied from 1 to 90 wt% and the appearance, optical, thermal, mechanical and rheological properties, as well the morphology of the films were evaluated. The PE/CNF films are transparent up to 20 wt% of NFC indicating a good dispersion of CNF, but a poor distribution, with PE-rich and CNF-rich regions observed by SEM. Improved mechanical properties were achieved, with a 100% and 15,900% increase in the Young’s modulus with 1 wt% and 90 wt% NFC, respectively. The rheological behavior indicated good melt processability. According to these results, aqueous polyolefin dispersions seem to be a promising, easy and relatively fast route for obtaining cellulose/polyolefins nanocomposites with low to high contents of cellulose nanofibrils.