An endurance test of Kapton foil in in-air PIXE system

We have tested endurance of Kapton foil for beam irradiation, which is used as an exit window of in-air PIXE system. Kapton foil is strong enough to withstand the pressure differential, thin enough to transmit the proton beam with minimal energy loss and does not contain heavier elements. However, little is known about the relation between its lifetime until breakdown and beam parameters such as beam current, beam diameter and energy loss. Endurance tests were made by an in-air PIXE system at Tohoku university. Irradiation was performed by proton beam with 2 or 3 MeV until the foil was broken for various beam parameters. The total charge until breakdown of the Kapton foil was analyzed in consideration of beam current, diameter and energy loss. Total charge until breakdown decrease with increase in the beam current density in case of the beam current density higher than 100 nA/mm2. On the other hand, total charge until breakdown does not decrease so much in the beam current density up to 100 nA/mm2. The li...