Improved Hydrogen Capping Effect in n-Type Crystalline Silicon Solar Cells by SiN(Si-Rich)/SiN(N-Rich) Stacked Passivation

The effect of hydrogen capping of SiN(Si-rich)/SiN(N-rich) stacks for n-type c-Si solar cells was investigated. Use of a passivation layer consisting of Si-rich SiN with a refractive index (n) of 2.7 and N-rich SiN with a refractive index of 2.1 improved the thermal stability. A single SiN passivation layer with a refractive index of 2.05 resulted in an initial lifetime of 200 μs whereas the layer with a refractive index of 2.7 resulted in a high initial lifetime of 2 ms, but the layer degraded rapidly after firing. A stacked passivation layer with refractive indices of 2.1 and 2.7 had a stable lifetime of 1.5 ms with an implied open-circuit voltage (iV oc) of 720 mV after firing. The thermally stable passivation mechanism with changing amounts of Si–N and Si–H bonding was analyzed by Fourier-transform infrared (FTIR) spectroscopy. Incorporation of the SiN x stack layer (2.7 + 2.1) into the passivated rear of n-type Cz silicon screen-printed solar cells resulted in energy conversion efficiency of 19.69%. Improved internal quantum efficiency in the long-wavelength range above 900 nm, with V oc of 630 mV, is mainly because of superior passivation of the rear surface compared with conventional solar cells.