On-Machine Measurement and Error Compensation for 6061 Aluminum Alloy Hexagonal Punch Using a Turn-Milling Machine

For machining parts with complex shapes, consisting of computer numerical control (CNC) machine tools, different CNC machine tools will be used according to the machining method. If the workpiece is removed for off-machine measurement after machining, when the size is incorrect, it will need to be returned to the CNC machine tool for secondary machining. In this case, the workpiece surface quality and machining accuracy will be affected, which is very time-consuming. On-machine measurement and complex machine center is a key to solve this problem. In the recent researches that the touch probe was integrated on three or five axis machine for error compensation and shape construction based on on-machine measurement, but turning-milling machine was rare. In addition, the most types of parts were thin-walled parts or thin web parts. In this study, a contact measurement system is integrated into a CNC combined turning-milling machine for on-machine measuring. Macro-programming is used to design the machining path of A6061-T6 aluminum alloy hexagonal punch, and the action of probe measurement is added to the machining path. As the measured data exceed the tolerance range, the calculated data are fed back to the controller for machining improvement by compensation. The finished hexagonal punch is measured in a 3D coordinate measuring machine and the error is compared. The experimental results show that the contact probe needs to be corrected before machining, and the size of the corrected workpiece can reach the tolerance range of ±0.01 mm. The size error of rough machining is larger than that of fined machining, and the size error of rough machining will increase with the length of the workpiece.