Microstructure and microhardness in horizontally solidified Al–7Si–0.15Fe–(3Cu; 0.3Mg) alloys
2018
ABSTRACTTransient horizontal directional solidification (THDS) experiments have been carried out with Al–7wt.%Si–0.15Fe, Al–7wt.%Si–3wt.%Cu–0.15wt.%Fe and Al–7wt.%Si–0.3wt.%Mg–0.15wt.%Fe alloys, to identify experimental relationships between growth rates (GR), cooling rates (CR), tertiary dendrite arm spacings (λ3) and microhardness (HV). Optical microscopy and scanning electron microscopy/energy-dispersive spectrometry (SEM/EDS) were used to perform a comprehensive microstructural characterisation of the β-Al5FeSi, ω-Al7Cu2Fe, θ-Al2Cu, π-Al8Mg3FeSi6 and α-Mg2Si intermetallic phases. The addition of Cu and Mg to the Al–7wt.%Si–0.15wt.%Fe alloy led to the precipitation of ω and π phases from the β phase. It has been found for all analysed alloys that power experimental functions given by λ3 = constant.(GR)-1.1 and λ3 = constant.(CR)-0.55 best describe the variation of λ3 with corresponding thermal and microstructural parameters.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
48
References
6
Citations
NaN
KQI