Effect of nano-enriched emulsified Pongamia biodiesel on combustion, performance and emission parameters of a compression ignition engine

Compression ignition engines are being used in transportation, agricultural and industrial sectors due to its durability, fuel economy and higher efficiency. This paper aims to present investigation focuses on the utilization of nano additives in emulsified blends of Pongamia biodiesel and its impact on combustion, emission and performance characteristics of a diesel engine.,Pongamia biodiesel was produced through two-stage transesterification process. Taguchi method with L9 Design of experiment was adopted to study the stability of fuel blends and 75 per cent diesel, 20 per cent biodiesel, 5 per cent water and 6 per cent of surfactant was found to be stable. Further, aluminum oxide nanoparticle was blended into the emulsified fuel in mass fraction of 100 ppm (D75-BD20-W5-S6-AO100) through ultrasonicating technique.,Oleic acid was found to be in prominent proportion in the Pongamia biodiesel. It was observed that D75-BD20-W5-S6 and D75-BD20-W5-S6-AO100 had the ability to produce lower in-cylinder pressure and rate of heat release compared to D100, B100 and D75-BD20 fuel blends. However, a higher rate of pressure rise was noticed in D75-BD20-W5-S6 and D75-BD20-W5-S6-AO100. Lower brake specific fuel consumption and relatively higher brake thermal efficiency were noticed in D75-BD20-W5-S6 and D75-BD20-W5-S6-AO100. Moreover, lower NOx and smoke emission were also observed for nano-emulsified fuel blends.,Metal-based nano-additive significantly improved the physio-chemical properties of the fuel. Based on the literature, it is understood that emulsified biodiesel blend with nano enrichment using Pongamia biodiesel as base fuel was not carried out. Identifying a stable blend of diesel-biodiesel-water-nano additive using Taguchi’s design of experiments approach was an added value in formulating the test fuels. Furthermore, the formulated test fuel was compared with mineral diesel, biodiesel, and diesel-biodiesel blend to understand its suitability to use as a fuel in compression ignition (CI) engine.