Rear splasher and rear reflector combination for camber beam motorcycle

The utility model discloses a combination of back fender and back reflector of bent-beam auto-bike and comprises a back fender and a back reflector. An installation protruding table is arrange on the end of the back fender; the reflector is fixed and connected with the installation protruding table through the back reflector; and the back reflector is lower than the installation protruding table and vertical with the horizontal. The utility model adds a back reflector bracket bases at the former back fender structure; the back reflector is fixed on the back reflector in stead of being fixed on the installation protruding table at the end of the back fender as before; thus, the back reflector is lower than the installation protruding table. After a back license tag of 210mm multiply 280mm is arranged on the back fender, the back license tag will not shade the back reflector, and the back reflector is vertical with the horizontal, thus the requirements of the national standard and the European EEC authentication are met, and the back fender mould is not required to change, which greatly reduces the manufacturing cost. The utility model has advantages of simple structure and easy implementation and is applicable for the wide popularization and utilization.