Corrosion fatigue behavior of low alloy steels under simulated BWR coolant conditions

Abstract The corrosion fatigue crack growth behavior of A533 and A508 low alloy steels under simulated boiling water reactor (BWR) coolant conditions was studied. Corrosion fatigue crack growth rates of A533B3 and A508 cl. 3 steels were significantly affected by the steel sulfur content, loading frequency and dissolved oxygen content of water environments. The data points outside the bound of Eason’s model could be attributed to the low frequency, higher steel sulfur content and high dissolved oxygen in water environments. The sulfur dissolved in the water environment from the higher-sulfur steels was sufficiently concentrated to acidify the crack tip chemistry even in the hydrogen water chemistry (HWC). Therefore, nitrogenated or HWC water showed little or no beneficiary effect on the high-sulfur steels. For the steel specimens of the same sulfur level, their corrosion fatigue crack growth rates were comparable in different orientations, which could be related to the exposure of fresh sulfides to the water environment. The percentages of sulfides per unit area, by quantitative metallography, were comparable for the steel specimens of both orientations. When the steel sulfur content was decreased to a critical sulfur content 0.005 wt.%, the crack growth rates decreased remarkably.