Mortar pumping and spraying vehicle

The utility model provides a mortar pumping and spraying vehicle, which is characterized in that an agitating sprayer is fixed on the vehicle frame, three conveyers are arranged in parallel above theagitating sprayer, a hopper accommodating cement, lime and sand is arranged on the vehicle frame, the augers of the conveyers are inserted into the hopper, a pipeline is arranged below the conveyers and communicated with the feed port of the agitating sprayer, a water inlet is formed on the pipeline-shaped housing of the agitating sprayer, the outlet at the front end of the agitating sprayer is connected with a mortar delivery pipe provided with a spray nozzle, and an air delivery pipe for supplying wind power to the spray nozzle is connected between the mortar delivery pipe and an air compressor arranged on the vehicle frame. The utility model not only can combine the four processes of sand sieving, mortar agitating, pumping and spraying into a whole, but also can enable the mortar to beuniformly sprayed on wall surfaces, therefore, the problems such as lack of quality guarantee, low efficiency, large labor intensity, material wastage and environmental pollution arising from the traditional manpower-based approach to pump and spray mortar are solved.