Technology Optimization of Wet Flue Gas Desulfurization Process

Optimization of the wet limestone (calcite) flue gas desulfurization (FGD) process is described, with the focus on the layout of subprocesses and equipment. The aim of optimization was to check the effectiveness and reliability of alternative layouts, involving intermediate product (gypsum) storage in the absorber make-up tank, instant production of limestone slurry from powder in a wet screw conveyer and automatic gypsum dewatering line operation. Three alternatives, standard layout, optimized layout and optimized layout without reheating of treated gas, were designed and tested in a small industrial FGD plant. The comparison included evaluation of desulfurization efficiency, economical feasibility (considering a 125 MW power plant) and reliability of operation. The efficiency of the system was not affected by the layouts. Investment costs were reduced by 5 and 15 % for alternatives 1 and 2, respectively, compared to standard offers on the market. With respect to operating costs, variable operating and maintenance costs could be decreased by 0.5 up to 2.5 %, respectively. As shown by risk and reliability analysis, the availability of the system in both alternative layouts remained unchanged or was better with regard to the standard layout.