Polymers for stabilisation of Wahiba dune sands, Oman

Dune sands are problematic soils because they have low shear strength and are susceptible to collapse on wetting. In the work reported in this paper, polymers in different concentrations from 1 to 3% were used to improve the engineering properties of dune sands. The sand–polymer mixtures were allowed to cure for 7 to 28 d. Laboratory analyses such as compaction tests, unconfined compression tests, unconsolidated undrained (UU) triaxial tests, consolidated undrained triaxial tests, chemical analysis, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were carried out to measure the engineering properties of the stabilised material. The results showed that the strength substantially increased with an increase in polymer content. For 3% polymer addition, the unconfined compressive strength (UCS) of the stabilised sand was about 4370 kPa. The UCS of a sand stabilised with 2% polymer was similar to that of sands stabilised with 12% cement and with 40% of cement-by-pass dust. The results of UU testi...