Modelling of laminated composite plates with weakly bonded interfaces using scaled boundary finite element method
2019
Abstract Scaled Boundary Finite Element Method (SBFEM), a relatively new approach, is investigated for the analysis of the weakly bonded laminated composite plates, under cylindrical bending. A plane strain formulation, which does not require any assumptions on the displacement or stress field, is developed. The interface between two plies is simulated using a linear spring layer model and incorporated in the numerical modelling with the help of zero thickness interface elements. The model is coded and postprocessed in MATLAB to capture general delamination, i.e. separation of the plies at interfaces in both tangential and normal direction. Due to the semi-analytical solution procedure of SBFEM, the model provides highly accurate results. Use of SBFEM reduces the meshing burden and complexities in the discretisation. Moreover, the method can handle hanging nodes, so one can use small interface elements without decreasing the size of adjoining domains. These qualities make the proposed numerical model computationally cheaper as well as very accurate. The presented formulation is demonstrated for a variety of examples in laminated composites including unidirectional laminates, symmetric cross ply laminates and antisymmetric cross ply laminates. The proposed model's close agreement as well as its superiority over the other methods is established for future reference.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
56
References
13
Citations
NaN
KQI