Lightning Impulse Current Tests on Conductive Fabrics

The large amount of electric current associated to lightning discharges is hazardous for living beings, equipment, structures and buildings. To protect those targets against lightning are used Lightning Protection Systems (LPS). However, there are some temporary outdoor activities and backcountry places where an adequate LPS cannot be set up mainly due to the large dimensions of its components and its heavy weight. On the search of lightweight lightning protection materials that can be used as part of special LPS, we research some types of electroconductive fabrics by applying high lightning impulse currents in laboratory. The fabric samples checked were pieces of 10 cm x 10 cm: two rip-stop type, a plain-weave, a non-woven and a carbon-impregnated polymeric, all of them obtained commercially. Under laboratory conditions, these samples were subject to subsequent lightning impulse currents registering the voltage and current signals. Optical and scanning electron microscope inspections were performed after tests. Despite some changes visualized as marks left on the fabric surface, the results show that investigated conductive textiles can endure ground currents produced by atmospheric lightning since they withstand the several applied laboratory lightning impulse currents. The outcomes suggest that the weave pattern of the conductive fabric influences the lightning current tolerance, enabling some conductive fabrics to be used in heavy-current applications and as part of personal LPS for outdoor, backcountry and mobile shelters, particularly when lightweight and portability are mandatory.