Water dust remover

The utility model relates to a water duster for the use in a material drying system, comprises a cylinder body and a water spraying device, wherein the water spraying device is arranged on the upper section of the cylinder body. A cyclone dehydration plate is arranged on the upper section inside the cylinder body. A sieve is arranged on the middle section of the inside of the cylinder body. One side of the lower section of the inside of the cylinder body is provided with an air inlet pipe, while the other side is provided with an overflow device. Dusty gas rushes downwards from the air inlet pipe into the water surface inside the cylinder body so that most of the dust particles are captured by water, and the rest fine particles ascend along with the gas and are partly captured by a water film on the filter screen. The remaining particles are captured by sprayed water fog. The upper part adopts a single layer or double layer cyclone dehydration plate to carry out gas liquid separation and the purified gas is discharged from a vent. The duster adopts multiple-time dedusting, is high in dust removal efficiency, and is particularly suitable for use on occasions where the dust content of the drying system is high.