Reddish-orange emission from sol-gel derived Sm3+-doped Sr2La8(SiO4)6O2 phosphors

2020 
Abstract In this study, Sr2La8-x(SiO4)6O2:xSm3+ (where x=(0.01 ≤ x ≤ 0.11)) phosphors were prepared successfully via the sol-gel route. Their structural properties were evaluated through fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) measurements. The XRD patterns confirmed the purity of the prepared compound that had an average crystallite size of ∼38.8 nm. From the FTIR spectra, various stretching and bending vibrations of the SiO4 units were identified. The band observed at 540 cm-1 was attributed to the normal vibration mode of La-O. The optical properties of the prepared phosphor were assessed through diffuse reflection spectroscopy and photoluminescence measurements. The diffuse reflectance spectrum exhibited seven peaks from the Sm3+ ions corresponding to f-f transitions from the ground state, 6H5/2, to the excited states, 6G7/2, 4D7/2, 4D3/2, 6P7/2, 4L15/2, 6P3/2, and (4I11/2,4I13/2). Out of all these transitions, the peak at 407 nm is the most prominent, this peak come from the 6H5/2→6P3/2 transition, which offers the maximum absorption. The phosphor’s excitation spectrum revealed a charge-transfer (CT) band that extended from 220 to 270 nm and was centered around 240 nm. The excitation spectra also exhibited several transitions of the Sm3+ ion, among these, the transition corresponding to 403 nm was chosen as the pumping wavelength owing to its prominence. The most intense emission peak was observed at 599 nm, this corresponds to the 4G5/2→6H7/2 transition. This emission’s CIE chromaticity coordinates placed it in the reddish-orange region, suggesting that the titled phosphor is suited for orange-red LEDs and the red component in WLEDs.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    33
    References
    3
    Citations
    NaN
    KQI
    []