Blood Clot Disruption in vitro Using Shockwaves Delivered by an Extracorporeal Generator after Pre-Exposure to Lytic Agent

Abstract The standard methods for recanalyzing thrombosed vessels are vascular stenting or administration of thrombolytic drugs. However, these methods suffer from uncertain success rate and side-effects. Therefore, minimally-invasive ultrasound methods have been investigated. In this article, we propose to use shockwaves after pre-exposure to fibrinolytic agent for disrupting thrombus. Shockwaves were delivered by an extracorporeal piezocomposite generator (120 mm in diameter, focused at 97 mm, pulse length = 1.4 μs). In vitro blood clots, made from human blood, were placed at the focal point of the generator. The clots were exposed to shockwaves either with or without prior immersion in a solution of streptokinase. The percentage of lysed clot was determined by weighing the clot before and after treatment. The proportion of lysed clot increased with the pressure at the focus and with the number of shocks. A mean clot reduction of 91% was obtained for 42 MPa in 4-min treatment duration only, without using streptokinase. For a treatment of 2 min at 29 MPa, the clot reduction increased significantly ( p in vivo trials. Additional studies must also be conducted with other fibrinolytic agents, whose abilities to penetrate clots are different. (E-mail: cedric.goldenstedt@orange.fr )