Design and testing of a magnetic suspension for a 90° horizontal bend conveyor

Purpose – A conveyor device is studied with the aim to reduce the friction between the inner surface of the beam and the chain. The lower is the friction between the chain and the beam, the lower is the surface wear. The magnetic repulsion force among permanent magnets (PMs) placed on the beam and on the chain is utilized to reduce friction. The paper aims to discuss these issues. Design/methodology/approach – The considered magnetic suspension is realized with PMs in repulsive configuration; it is designed by solving a constrained optimization problem, with reference to the geometry of the 90° horizontal bend FlexLink WL322 conveyor. Flux density field and its gradient are evaluated using volume integral equation method, allowing to calculate the forces acting on the chain and the stiffness of the magnetic suspension. Findings – The magnetic suspension prototype was manufactured and tested. The experimental and calculated values of the forces acting on the chain compares well. A stable horizontal equilib...