Densification of A3-3 matrix graphite to inhibit the infiltration of liquid FLiBe salt in molten salt reactors
2021
Abstract In this study, a novel graphite was prepared by adding MCMBs (mesocarbon microbeads) to densify matrix graphite A3-3, a typical fuel element and moderator material in high-temperature gas-cooled reactors. The densified graphite was evaluated as a potential fuel element material for molten salt reactors (MSRs). In particular, the effects of MCMB loading on physical properties and the corresponding effects on the infiltration of liquid fluoride salt in MSRs were studied, as molten salt infiltration can impact safe reactor operation. MCMBs with a mean particle size of approximately 3 μm were added to matrix graphite A3-3 at loading levels of 1 wt%, 5 wt%, 10 wt%, and 15 wt%, and samples were prepared by a quasi-isostatic pressing process at 250 MPa. Mercury porosimetry data showed that MCMB-densified graphite (MDGs) had lower porosity (approximately 15 vol%) and median pore diameters (ranging from 105 to 306 nm) compared to A3-3 itself (22.9 vol% porosity and 573 nm median pore diameter). Importantly, the MDGs exhibited greatly reduced infiltration by FLiBe molten salt compared to unmodified A3-3. For instance, A3-3 modified with 1 wt% MCMB exhibited a 2.1% weight increase after treatment at 1 MPa for 20 h, while unmodified A3-3 exhibited a weight increase of 11.6%. This study revealed that MDGs could be promising candidate materials for the graphite matrix of fuel elements as well as a neutron moderator and reflector in MSRs.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
14
References
0
Citations
NaN
KQI