Aptamer/derivatization-based surface-enhanced Raman scattering membrane assembly for selective analysis of melamine and formaldehyde in migration of melamine kitchenware.

Abstract The analysis of contaminants in migration of food contact material (FCMs) is an urgent demand for food safety. In this study, melamine and formaldehyde in melamine kitchenware were selectively analyzed by surface-enhanced Raman scattering (SERS) via aptamer/derivatization-based membrane assembly. The membrane assembly was designed by simple filtration of Ag nanoparticles-decorated “stellate” silicon dioxide (SiO2/Ag) and composites of reduced graphene oxide and Ag nanoparticles (rGO/Ag) functioned with specific reagents. High selectivity can be realized by melamine aptamer and derivatization reagent of formaldehyde, respectively. The relative standard deviations (RSDs) of melamine and formaldehyde analysis for 11 replicate measurements, 14 consecutive days and 25 batches are less than 6.0 %, which shows excellent repeatability and reproducibility. After the method was validated, the limits of detection (LOD) for melamine and formaldehyde are 0.15 mg/L and 0.21 mg/L, respectively. The developed method was applied to determine the content of melamine and formaldehyde in migration of melamine kitchenware with low relative errors (less than 5.3 %) compared to chromatographic results. The recoveries of melamine and formaldehyde for migrations of melamine kitchenware are 91.2–110.0 % and 94.0–106.0 % with RSDs in range of 1.8–8.3 % and 4.7–9.1 %, respectively. The method proposed a new concept of convenient, portable and reliable strategy for analysis of melamine and formaldehyde in migration from FCMs.