Dentin demineralization. The effects of citric acid concentration and application time.

: Preliminary work has shown that the rate of dentin demineralization increases with increasing concentrations of citric acid. This rate subsequently diminishes at much higher concentrations. The purpose of this study was to more precisely identify the citric acid concentration which produces peak dentin demineralization and to determine if this demineralization process is time dependent. Flat dentin surfaces were prepared on the buccal and lingual sides of 15 bovine molars. 8 depressions were made in each dentin surface using a #8 round bur in a high-speed handpiece with air-water coolant. Various concentrations of citric acid solutions (weight per cent) were prepared, e.g., 0%, 10%, 20%, 25%, 30%, 35%, 40%, 65% and their respective pH's recorded. 3 microliters of each citric acid solution were placed in individual depressions on the dentin surfaces and left undisturbed for 1, 2 or 3 min. Cotton pellets were used to soak up the citric acid solution, along with any dissolved calcium, and were subsequently placed in 10 ml of 18 Me omega water. The parts per million calcium found in each water sample were determined using atomic absorption spectrophotometry. Peak dentin demineralization for 1-, 2- and 3-min application times occurred at 30% (pH = 1.55), 25% (pH = 1.62) and 25% (pH = 1.62) citric acid concentrations/(pH), respectively. Dentin demineralization was found to be time-dependent for all citric acid solution concentrations. The clinical significance of these findings is discussed.