A Laboratory and Numerical-Simulation Study of Co-Optimizing CO 2 Storage and CO 2 Enhanced Oil Recovery

This paper presents experimental observations that delineate co-optimization of carbon dioxide (CO2) enhanced oil recovery (EOR) and storage. Pure supercritical CO2 is injected into a homogeneous outcrop sandstone sample saturated with oil and immobile water under various miscibility conditions. A mixture of hexane and decane is used for the oil phase. Experiments are run at 70 degrees C and three different pressures (1,300, 1,700, and 2,100 psi). Each pressure is determined by use of a pressure/volume/temperature simulator to create immiscible, near-miscible, and miscible displacements. Oil recovery, differential pressure, and compositions are recorded during experiments. A co-optimization function for CO2 storage and incremental oil is defined and calculated using the measured data for each experiment. A compositional reservoir simulator is then used to examine gravity effects on displacements and to derive relative permeabilities.Experimental observations demonstrate that almost similar oil recovery is achieved during miscible and near-miscible displacements whereas approximately 18% less recovery is recorded in the immiscible displacement. More heavy component (decane) is recovered in the miscible and near-miscible displacements than in the immiscible displacement. The co-optimization function suggests that the near-miscible displacement yields the highest CO(2)storage efficiency and displays the best performance for coupling CO2 EOR and storage. Numerical simulations show that, even on the laboratory scale, there are significant gravity effects in the near-miscible and miscible displacements. It is revealed that the near-miscible and miscible recoveries depend strongly on the endpoint effective CO2 permeability.