Effect of Polyhedral Oligomeric Silsesquioxane and Sorbitol on Properties of Isotactic Polypropylene

2015 
Isotactic polypropylene(iPP) was modified by the introduction of polyhedral oligomeric silsesquioxanes(POSS) and 1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol(DMDBS). Chemical combination of (3-mercapto)-propyl-heptaisobutyl POSS with DMDBS(POSS-DMDBS), and physical mixing of DMDBS with octaisobutyl POSS (iso-POSS/DMDBS) or trisilanolisobutyl POSS(tri-POSS/DMDBS) were applied respectively to modifying iPP, and the effects of POSS and DMDBS on crystallization, rheological and mechanical properties of iPP were systematically investigated. The results indicate that iso-POSS/DMDBS and tri-POSS/DMDBS were more effective than POSS-DMDBS on the improvement of the crystallization behavior of iPP due to the higher crystallization temperature, while the crystallinity of iPP containing POSS-DMDBS was enhanced, approximately approached to that of iPP containing tri-POSS/DMDBS. The tensile strength of iPP with POSS-DMDBS was significantly increased from 34 MPa to 40 MPa, as high as that of iPP with iso-POSS/DMDBS. The different effects caused by the specific interaction between POSS and DMDBS could possibly be applied in the modification of iPP.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    19
    References
    4
    Citations
    NaN
    KQI
    []