Metrology development for extreme ultraviolet lithography: Flare and out-of-band qualification

Extreme ultraviolet lithography (EUVL) is the leading candidate for lithography beyond the 22 nm half-pitch device manufacturing node. These geometries impose tighter requirements for standard critical dimension metrology and call for new strategies able to quantify and monitor extreme ultraviolet (EUV) specific parameters. In this paper, the approaches to measure two key EUV imaging parameters, namely flare and out-of-band (OoB) radiation, are discussed. EUV sources are known to emit a broad spectrum of wavelengths ranging from EUV to deep ultraviolet (DUV) and beyond. As the DUV can contribute to the photoresist exposure and degrade imaging performance, it is critical to accurately determine the amount of DUV OoB in EUVL exposure tools at the wafer level. In this paper, a methodology using an aluminum-coated reticle to measure the DUV/EUV ratio in resist is discussed. Such a mask is able to provide quantitative in situ information on the scanner DUV content thanks to its ability to transmit DUV and abso...