Inhibition of Iron Corrosion by Imidazole: An Electrochemical and Surface Science Study

Abstract The difference in corrosion inhibition behavior of imidazole deposited on iron by two different methods has been examined using electrochemical impedance spectroscopy (EIS), x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Adding imidazole directly into the aqueous corrosive medium has been observed to provide greater protection against corrosion, in comparison to the direct deposition of the inhibitor onto the metal surface prior to exposure. Analysis of the alternating current (AC) impedance spectra as a function of time revealed that at steady state, the value of the polarization resistance (Rp) in the case of imidazole addition to the corrosive medium was 20 times larger than the baseline, and in the predeposited case it was only three times larger. Results of XPS investigations suggested that in the former case, the imidazole reacts through the “pyrrole-type” nitrogen with the aromatic ring nearly parallel to the metal surface. In the latter situation, a “pyrid...