A 1×4 MMI-integrated high-power waveguide photodetector
2013
We report on the design, packaging and experimental characterization of a waveguide photodetector monolithically integrated with a 1×4 MMI coupler and a vertically-tapered spotsize converter. The total device consists of an array of 4 photodiodes connected in parallel in order to increase the saturation current. A 3-dB bandwidth of up to 30 GHz was measured. High output power was achieved with approximately 10 dBm at 10 GHz and 7.5 dBm at 20 GHz. From 1-dB compression measurements at 10 GHz and 2 0 GHz, a saturation photocurrent as high as 40 mA was found. At 10 GHz and 20 GHz a third order intercept point (OIP3) of over 20 dBm was measured for photocurrent levels up to 35 mA.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
17
References
3
Citations
NaN
KQI