On the regeneration of thermally regenerative ammonia batteries

In the past few years, thermally regenerative ammonia battery (TRAB) has been proposed as an effective tool to recover waste heat at temperatures below 130 °C. Most of the literature available is devoted to the power production step, with less attention being given to the regeneration step (e.g. the removal of ammonia from the anolyte). In this paper, the TRAB is analyzed with particular attention to the regeneration step and to the study of various generation of energy-regeneration cycles. It was shown that approximately 90 °C is necessary for the regeneration step due to the fact that ammonia is present in the anolyte mainly as a complex. Various cycles were performed with success, demonstrating the efficacy of the proposed regeneration step.