STUDY OF AXIAL FORCES WITH THE PURPOSE TO REALIZE A COMBINED PROCESS «HELICAL ROLLING-PRESSING»
2015
The key factor for practical realization of the combined process «helical rolling-pressing» is the axial force of the helical rolling, which should provide a continuous pressing in the matrix after the rolls. For the measurement of the maximum axial rolling force, which is actually the reserve of friction forces, a special strain gauge has been made. The work was carried out at a three-roll helical rolling mill “10-30” for the case of hot rolling of steel bars with diameters of 16 - 25 mm at a reduction of 6 % of diameter and a temperature of 1000°C. The results shown are of 24 tests.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
1
References
2
Citations
NaN
KQI