Modelling of mechanical properties of randomly oriented strand thermoplastic composites
2017
There is an emerging interest in the aerospace industry to manufacture components with intricate geometries using discontinuous-fibre carbon/polyether-ether-ketone moulding systems (obtained by cutting unidirectional tape into strands). Great formability and high modulus can be achieved with this type of composites, but the high variability of measured properties can have a detrimental effect on the design allowables. When it comes to prediction of mechanical properties, it is important to capture the average strength and modulus as well as their statistical variability. This article proposes a stochastic finite element technique that uses the concept of randomly oriented strands to model variability, and the application of Hashin’s failure criteria and fracture energies to estimate strength. Overall, the model matches the trends observed during experiments and shows that strength of randomly oriented strand composites is significantly lower than that of continuous-fibre laminates due to the ‘weakest-link...
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
16
References
31
Citations
NaN
KQI