Selective removal of phosphate from aqueous solution by MIL-101(Fe)/bagasse composite prepared through bagasse size control.

Abstract MIL-101(Fe)/sugarcane bagasse (SCB) with high adsorption capacity and selectivity toward phosphate was prepared through in-situ synthesis method. Effects of bagasse size on the morphology and performances of the composites were investigated, and adsorption behavior and mechanism of phosphate on the composite prepared at the optimum bagasse size were studied. Results showed that composite prepared with bagasse size of 200-300 mesh (MIL-101(Fe)/SCB3) showed much higher adsorption capacity than SCB, blank MIL-101(Fe) and the composites prepared with the other bagasse size, which was due to the more positively charged surface and the more exposed adsorption active sites including FeOHx and exchangeable Cl-. Co-ions experimental results illustrated that the as prepared MIL-101(Fe)/SCB3 showed high adsorption affinity toward phosphate, and the common cationic and anionic ions exhibited negligible effects on phosphate adsorption capacity and rate. The optimum pH range for phosphate adsorption on MIL-101(Fe)/SCB3 was from 3.0 to 10.0, and in this range Fe release was less than 0.03%. Adsorption mechanism showed that phosphate was adsorbed mainly through electrostatic force, ion-exchange, and inner-sphere surface complex. Simulated wastewater treatment experiment showed that MIL-101(Fe)/SCB3 could efficiently remove phosphate from aqueous solution.